Issue :-> When we are starting backup , its taking approx 8 min everytime to discover path .
Session shared below :
Normal] From: BMA@dcrrbap2 "HP:Ultrium 4-SCSI_2" Time: 3/14/2014 1:04:57 PM
STARTING Media Agent "HP:Ultrium 4-SCSI_2"
[Normal] From: BSM@dp-rrb "DAILY_BKP_149_THU" Time: 3/14/2014 1:07:50 PM
Opening MultiPath library control named 'HP:MSL G3 Series' on path 'vishnu;/dev/rac/c34t0d1'.
[Warning] From: UMA@dcrrbap2 "HP:MSL G3 Series" Time: 3/14/2014 1:14:47 PM
The device "HP:MSL G3 Series" could not be opened("Device could not be accessed")
[Normal] From: UMA@dcrrbap2 "HP:MSL G3 Series" Time: 3/14/2014 1:14:47 PM
Starting the device path discovery process.
[Normal] From: UMA@dcrrbap2 "HP:MSL G3 Series" Time: 3/14/2014 1:15:14 PM
A new path(s) "/dev/rchgr/autoch1" found for device "HP:MSL G3 Series" and stored.

this is happening for all of our 11iv3 clients where we have installed powerpath emc software .
CM . Win2008 R2.

Hi:

We have the dp6.2 on a windows server, but the installation both on the windows server, and on a linux client.

We put up a new linux server (redhat 6.5), and I am having trouble installing the disk agent on it, while I had little trouble doing this a few years ago with a linux server (redhat 4). I understand that the 6.5 is much more security concious than 4.

In any event, I changed the .omnirc on the linux server (which has the installation files) to run ssh. I also built ssh keys, and I can ssh root@redhat6.5 wihout it asking for a password. Unfortunately, when I try to install the da on the linux 6.5 client, it still asks for root's password which I supply, but it says it can't connect and repeatedly asks for the password, until I give up and cancel.

Any idea what to do? I could install from the cd I guess, but I don't have it, and I can't seem to find 6.2 install cds on the web anymore, just 7 and up. Does anyone have a link to the 6.2 linux cd's?

Thanks

We are in DP V8.0

I try to restore a only tablespace at a time without restoring all the database. It's a TSPITR in oracle langage.

i try to execute it with rman command line but i have an error. With the DP GUI it seems not to be possible.

Is there a solution with DP to to TSPITR ?

my error :

RMAN> allocate channel for maintenance type 'sbt_tape' parms 'SBT_LIBRARY=/opt/omni/lib/libob2oracle8_64bit.so,ENV=(OB2MAINTENANCE=1)';

RMAN> RECOVER TABLESPACE DATA, IND until time "to_date('18-mar-2014 11:02;00','DD-Mon-yyyy HH24:MI:SS')" AUXILIARY DESTINATION '/oragard/jylh';

Starting recover at 18-MAR-14
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=324 instance=PRCi1 device type=DISK
RMAN-05026: WARNING: presuming following set of tablespaces applies to specified point-in-time

List of tablespaces expected to have UNDO segments
Tablespace SYSTEM
Tablespace UNDOTBS1
Tablespace UNDOTBS2

Creating automatic instance, with SID='pdke'

initialization parameters used for automatic instance:
db_name=PRCI
db_unique_name=pdke_tspitr_PRCI
compatible=11.2.0.2.0
db_block_size=8192
db_files=200
sga_target=280M
processes=50
db_create_file_dest=/oragard/jylh
log_archive_dest_1='location=/oragard/jylh'
#No auxiliary parameter file used

starting up automatic instance PRCI

Oracle instance started

Total System Global Area 292278272 bytes

Fixed Size 2225872 bytes
Variable Size 134220080 bytes
Database Buffers 146800640 bytes
Redo Buffers 9031680 bytes
Automatic instance created
Running TRANSPORT_SET_CHECK on recovery set tablespaces
TRANSPORT_SET_CHECK completed successfully

contents of Memory Script:
{
# set requested point in time
set until time "to_date('18-mar-2014 11:02;00','DD-Mon-yyyy HH24:MI:SS')";
# restore the controlfile
restore clone controlfile;
# mount the controlfile
sql clone 'alter database mount clone database';
# archive current online log
sql 'alter system archive log current';
# avoid unnecessary autobackups for structural changes during TSPITR
sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;';
}
executing Memory Script

executing command: SET until clause

Starting restore at 18-MAR-14
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=6 device type=DISK

Removing automatic instance
shutting down automatic instance
Oracle instance shut down
Automatic instance removed
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 03/18/2014 14:12:55
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06024: no backup or copy of the control file found to restore

 Thanks

We are trying to set up a soft quota warnings on our storeonce backup systems through data protector.

It shows the warning in the backups jobs

[Warning] From: BMA@Server"stotre [GW 9500:4:2680583120647979075]" Time: 3/18/2014 8:27:46 AM
The StoreOnce store "Store" on server "172.30.11.19"
exceeded the quota of 5 GB for the size on disk by approx. 9 GB !

These errors do not show up in the DP event log.  Any ideas where these logs are reported other then in the backup job?

Hi All,

What happed if configuration is not backed up?

Can I do a disaster recovery restore?

What is an concern?

Please suggest, Thanks.

Hello everyone,

Recently i set up Data Protector Virtual Environment backup through my vCenter server. Integration went smoothly and I can backup all my VMware virtual servers thorugh Data Protector Virtual Environment.

Just this weekend I ran first full backup of whole virtual environment and it completed without errors.

Then I created and scheduled incremental backup for this environment with Snapshot Handling set to Single and enabled Changed Block Tracking (same settings are for full backup too). Reason for having two different jobs for full and incremental is that only some virtual machines are included in incremental backup, all other are included only in full backup.

Tha problem that happened on incr backup is that 2 virtual machine have this error:

[Major] From: BSM@backup-server "VMware_LAN_incr" Time: 19.3.2014 10:09:17
FAILED to start mirror of object BAR vcenter-server:/%2FDatacenter/4/%2FDatacenter%2Fhost%2FCluster%2Fserver "VEAgent" to mirror group "1".
No mirror device with suitable block size found.

One of those VMs gets backed up successfully with status Completed, but only on central tape device and not on mirror tape device. Second VM isn't backed at all and gets Failed status. All othere VMs are backed up successfully on both tape devices.

My Environment:

- Data Protector 6.2, patched, installed on Win 2k3 Standard

- Tape - IBM System Storage TS3100 LT04, connected with CellManager via SCSI

- VMware ESXi 4.1.0

- both problematic VMs are Win 2k3 Server

 Hi all,

When I run backup of Windows Clusters Servers I get this message from one node:

[Minor] From: VBDA@ node1.domain.com

" node1.domain.com [/CONFIGURATION]" Time: 17.3.2014. 6:31:17

[81:141] \Registry\0.Cluster

Cannot export configuration object: (Details unknown.) => backup incomplete.

[Warning] From: VBDA@ node1.domain.com

" node1.domain.com [/CONFIGURATION]" Time: 17.3.2014. 6:33:23

Error copying file

from: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy12\Windows\cluster\ClNetCfg.dll

to: Q:\Cluster\Export\ClNetCfg.dll

([5] Access is denied. ).

Is this normal behavior or …?

TIA

Problem:

After updating to DP 8.1, the hpdp-idb service does not start:

> omnisv -status

    ProcName      Status  [PID]

===============================
    crs         : Active  [3464]
    mmd         : Active  [5364]
    kms         : Active  [5440]
    hpdp-idb    : Down
    hpdp-idb-cp : Active  [5604]
    hpdp-as     : Active  [4284]
    omniinet    : Active  [4980]

    Sending of traps disabled.
===============================
Status: At least one of the Data Protector processes/services is not running.

If, prior to the DP 8.1 upgrade, DP 7 or 8.0 had all files in a common directory, for example

C:\Program Files\OmniBack

or

D:\DataProtector

We have found that the update to DP 8.1 creates a file "C:\Program" and does not clean it up after the installation, even it has been successfully.

It looks like this file is only left over in case of updating DP installations that utilize a common directory.

Look for the folder '\Program' and delete it for example

C:\Program

or

E:\Program

I'm trying to deploy Storeonce VSA with enterprise manager .

It always fails in the "fetching deploiment data" , it does not even start deploying , with an "exception" ( no error mentioned )

Has anyone had the same issue ?

thanks

Hi there,

Someone know or have forecast when oracle 12c will be supported by Dp.

Thanks

HI folks ,

My HP DP 8.0 IDB is corrupted. No backup / restore / GUI session is opening.

Got this notification :

Critical 03/17/2014 19:57 OMNIDBCHECK DbCorrupted "[138:706] Corruption in the "Database" part of the Data Protector Internal Database has been detected ("The database connection failed.")." 

When  i ran consistency check it shows :

./omnidbcheck -extended
Error opening the Internal Database.

Check Level Mode Status
===========================================================
Database connection -connection Failed
Schema consistency -schema_consistency Failed
Datafiles consistency -verify_db_files Failed
Database consistency -database_consistency Failed
Media consistency -media_consistency Failed
SIBF(readability) -sibf Failed
DCBF(presence and size) -bf Failed
OMNIDC(consistency) -dc Failed
DONE!

./omnisv status

    ProcName      Status  [PID]

===============================

    crs         : Active  [7959]

    mmd         : Active  [7957]

    kms         : Active  [7958]

    hpdp-idb    : Down

    hpdp-idb-cp : Active  [7951]

    hpdp-as     : Active  [8000]

    omnitrig    : Active

    Sending of traps disabled.

===============================

Status: At least one of the Data Protector processes/services is not running.

PLs help me to recover my IDB.

Helppleaseunderstand!

Configuration: DP7.03, Windows2008R2, stand-aloneservers, Cellwithfilelibrarydeviceandoneclient. Icreatedasimplespecificationforbackuptestfolderfromclient. Scheduledspecificationfulfillswithoutanyerrorsorwarnings. 

Thebackupoperatorisdefinedasamemberofthebuilt-in (default) groupofoperators (rightshavenotchanged!) 
Iftheoperatorstartsthespecificationinthemanualmode, itisperformedsuccessfully withsuchawarning:

[Warning] From: INET_thread_vbda.exe@srv-dsm.security.local"srv-dsm.security.local" Time: 19.03.201423:39:57
NodataforuserOPER@SRV-DP7inInet'simpersonationconfiguration.

Recoverybyadministratorrunswithouterrors.
Whenoparatortrytoperformdatarecoveryerroroccurs:

[Warning] From: INET_thread_vrda.exe@srv-dsm.security.local"srv-dsm.security.local" Time: 19.03.201423:46:53
NodataforuserOPER@SRV-DP7inInet'simpersonationconfiguration.

[Major] From: RSM@srv-dp7.security.local"" Time: 19.03.201423:44:00
[61:1004] Error starting Filesystem restore DA on srv-dsm.security.local.

Why? Members of the default group of operators do not have sufficient rights to recovery? Why mention "impersonation"? Used as a simple file backup/restor without SharePoint or Exchange.

thank you

Alex

Hi,

i m having big problems with HP protected tools Drive Encryption.

My Windows OS unable to boot up . Black screen, Error message: "McAfee Endpoint Encryption Fatal Error: [0xEE020006] Getting disk info."

My Machine details:

Machine: HP EliteBook 8470P (D0N55PA)
HDD: WD7500BPKT (750GB, 7500rpm, 2.5”)
OS 1: Windows 7 64x (Installed on Disk 0, Partition 1)…Primary and on use all the time.
OS 2: Windows 8 64x (Installed on Disk 0, Partition 2)..secondary and back up OS.
Partition details:
Partition 1: 100GB, NTFS, Label: Win 7
Partition 2: 100GB, NTFS, Label: Win 8
Partition 3: 200GB, NTFS, Label: Data
Partition 4: 376GB, NTFS, Label: PSD

I get my local IT engineer to support. He reinstall windows 8 under partition 2. Machine was able to restart with windows 7 & windows 8, but the both OS unable to recognise partition 3 & 4, thus request to format it!
Our engineer has tried multiple type of solution to recover the data which available from the internet by using disktech with various version, but the most close is disk tech 2012 from HP.
However after booting with disktech2012 software, the program can accept the drive encryption key, but the particular partition 3 & 4 was showing blank as nothing is inside.

Therefore please advise how we can recover the data on partition 3 & 4.

Software details:
The machine was installed with:
HP ProtectTools Security Manager Ver.  7.0.2.1213  
Embedded Security for HP ProtectTools ver. 7.0.100.3001
Drive Encryption for HP ProtectTools ver. 7.0.39.32378 

Partition 1 & 2 Un protected by HP protecttools.
Partition 3 & 4 was fully protected by Drive Encryption for HP ProtectTools

Partition contain details:

Partition 1 (100GB) – Windows 7 OS & system files only. (including boot sector & record)
Partition 2 (100GB)- windows 8 OS & system files only.
Partition 3 (200GB) – ALL IMPORTANT OFFICE DOCUMENT, EMAILS (.pst), PHOTOS, Embedded security backup keys, music, PPT and many more.
Partition 4 (376GB) – private collection movies & Personal secure drive. (I have the PSD back-up copy, but the key to unlock was stuck in partition 3).

Looking forward for your reply.

Thank you.

Hello

We had any probems with an ZDB Backup on Data Protector 8.10 under Linux.

[Normal] From: BSM@HOST "DATABASE_DB_ZDB"  Time: 20.03.2014 10:45:34
    Backup session 2014/03/20-21 started.

[Normal] From: BSM@HOST "DATABASE_DB_ZDB"  Time: 20.03.2014 10:45:34
    OB2BAR application on "HOST2" successfully started.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:35
    Starting backup of target database.

    Net service name: DATABASE.
    Instance status: OPEN.
    Instance name: DATABASE.
    Database DBID = 1948688941.
    Database control file type: CURRENT.
    Database log mode: ARCHIVELOG.


[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:35
    Making list of target database files.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:35
    Making list of target database datafiles.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:35
    Making list of target database control files and online redo logs.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:35
    Making list of target database files completed.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:35
    Creating list of target database files for resolving.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:35
    Target database resolve file list:

    /PACKAGE/db01/DATABASE/DATABASE_system_00.dbf
    /PACKAGE/db01/DATABASE/DATABASE_sysaux_00.dbf
    /PACKAGE/db01/DATABASE/DATABASE_undo_00.dbf
    /PACKAGE/db01/DATABASE/DATABASE_appli_00.dbf

    /PACKAGE/oracfg1/DATABASE/control/control_DATABASE_01.ctl
    /PACKAGE/oracfg2/DATABASE/control/control_DATABASE_02.ctl
    /PACKAGE/oracfg2/DATABASE/control/control_DATABASE_03.ctl

    /PACKAGE/redo1/DATABASE/DATABASE_redo_04.log
    /PACKAGE/redo2/DATABASE/DATABASE_mredo_04.log
    /PACKAGE/redo1/DATABASE/DATABASE_redo_03.log
    /PACKAGE/redo2/DATABASE/DATABASE_mredo_03.log
    /PACKAGE/redo1/DATABASE/DATABASE_redo_02.log
    /PACKAGE/redo2/DATABASE/DATABASE_mredo_02.log
    /PACKAGE/redo1/DATABASE/DATABASE_redo_01.log
    /PACKAGE/redo2/DATABASE/DATABASE_mredo_01.log


[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:35
    Creating list of target database files for resolving completed.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:35
    Resolving target database files.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:36
    Starting agent on HOST.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:37
    Starting agent on HOST2.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:37
    Resolving backup objects on the application system.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:39
    Resolving of backup objects on the application system completed.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:39
    The following disks were successfully mapped from
    character device path names to LDEVs:

    Disk                         SEQ#      Port  LDEV
    -------------------------------------------------------
    /dev/disk/by-id/scsi-360060e80164d770000014d770000f73e 85367     CL3-D F73Eh (63294)
    /dev/disk/by-id/scsi-360060e80164d770000014d770000f73c 85367     CL3-D F73Ch (63292)
    /dev/disk/by-id/scsi-360060e80164d770000014d770000f73d 85367     CL3-D F73Dh (63293)
     -------------------------------------------------------

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:39
    Successfully attached to the command device /dev/sdc
    with instance number 301.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:39
    The following CA pairs will be used in current session:

    SEQ#    LDEV          Port   TID  LUN  Status     SEQ#    LDEV
    ------------------------------------------------  --------------------
    85367   F73Eh (63294)  CL3-D    0  216  STAT_PAIR  85420   F73Eh (63294)
    85367   F73Ch (63292)  CL3-D    0  214  STAT_PAIR  85420   F73Ch (63292)
    85367   F73Dh (63293)  CL3-D    0  215  STAT_PAIR  85420   F73Dh (63293)
       ------------------------------------------------  --------------------

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:39
    Resolving of backup objects on the application system completed.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:41
    Successfully attached to the command device /dev/sdee
    with instance number 301.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:41
    The following BC pairs will be used in current session:

    SEQ#    LDEV          Port   TID  LUN  MU#  Status     SEQ#    LDEV
    -----------------------------------------------------  --------------------
    85420   F73Eh (63294)  CL3-D    4  215    0  STAT_PSUS  85420   FC3Eh (64574)
    85420   F73Ch (63292)  CL3-D    4  213    0  STAT_PSUS  85420   FC3Ch (64572)
    85420   F73Dh (63293)  CL3-D    4  214    0  STAT_PSUS  85420   FC3Dh (64573)
       -----------------------------------------------------  --------------------

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:41
    Disabling the backup system.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:41
    The backup system was successfully disabled.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:41
    Synchronizing disks! 99 % completed!

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:47
    Resolving target database files completed.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:47
    Starting full resync of recovery catalog.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:50
    Full resync of recovery catalog completed successfully.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:50
    Placing target database into backup mode.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:50
    Placing target database into backup mode completed.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:50
    Backing up current control file to ...

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:52
    Backing up current control file completed.
    Location: HOST:/var/opt/omni/tmp/ctrlDATABASE_bckp.ctl.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:52
    Replicating target database files.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:52
    Preparing the application system for splitting of disks.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:52
    Disabling the application system.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:52
    The application system was successfully disabled.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:52
    The application system is prepared for splitting of disks.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:52
    Splitting disks.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:58
    Splitting of disks completed.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:58
    Resuming the application system.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:45:58
    The application system was successfully resumed.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:58
    Replicating target database files completed.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:58
    Placing target database out of backup mode.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:58
    Placing target database out of backup mode completed.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:45:58
    Preparing target database replica on the backup host.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:59
    The following disks were successfully mapped from
    LDEVs to character device path names of disks:

    SEQ#      Port   LDEV       Target Lun Disk
    --------------------------------------------------------
    85420     CL8-D  FC3Eh (64574)     15 225 sdkh                
    85420     CL8-D  FC3Ch (64572)     15 223 sdkf                
    85420     CL8-D  FC3Dh (64573)     15 224 sdkg                
     --------------------------------------------------------

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:59
    Resolving backup objects on the backup system.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:59
    Resolving of backup objects on the backup system completed.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:59
    Filesystem /dev/vgPACKAGE_r2/redo2DATABASE
    has been successfully dismounted
    from /PACKAGE/redo2/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:59
    Filesystem /dev/vgPACKAGE_r1/redo1DATABASE
    has been successfully dismounted
    from /PACKAGE/redo1/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:59
    Filesystem /dev/vgPACKAGE_db01/DATABASEfs2
    has been successfully dismounted
    from /PACKAGE/oracfg2/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:59
    Filesystem /dev/vgPACKAGE_r1/DATABASEfs1
    has been successfully dismounted
    from /PACKAGE/oracfg1/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:45:59
    Filesystem /dev/vgPACKAGE_db01/db1DATABASE
    has been successfully dismounted
    from /PACKAGE/db01/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:03
    Volume group vgPACKAGE_db01 has been successfully deactivated.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:03
    Volume group vgPACKAGE_r1 has been successfully deactivated.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:04
    Volume group vgPACKAGE_r2 has been successfully deactivated.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:04
    Preparing the backup system.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:35
    Volume group vgPACKAGE_db01 has been successfully activated.
 
[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:36
    Volume group vgPACKAGE_r1 has been successfully activated.
 
[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:37
    Volume group vgPACKAGE_r2 has been successfully activated.
 
[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:38
    Filesystem /dev/vgPACKAGE_db01/db1DATABASE
    has been successfully mounted
    to /PACKAGE/db01/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:38
    Filesystem /dev/vgPACKAGE_r1/DATABASEfs1
    has been successfully mounted
    to /PACKAGE/oracfg1/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:38
    Filesystem /dev/vgPACKAGE_db01/DATABASEfs2
    has been successfully mounted
    to /PACKAGE/oracfg2/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:38
    Filesystem /dev/vgPACKAGE_r1/redo1DATABASE
    has been successfully mounted
    to /PACKAGE/redo1/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:38
    Filesystem /dev/vgPACKAGE_r2/redo2DATABASE
    has been successfully mounted
    to /PACKAGE/redo2/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:38
    The backup system was successfully prepared.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:38
    Preparation of the backup system completed.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:46:38
    Preparing target database replica on the backup host completed.

[Normal] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:46:38
    Mounting target database replica on the backup host.

[Major] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:46:38
    The database reported error while performing requested operation.

ORA-01031: insufficient privileges

[Major] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:46:38
    The database reported error while performing requested operation.

SHUTDOWN IMMEDIATE sqlcode 1017

[Major] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:46:38
    The database reported error while performing requested operation.

ERROR:
 ORA-01017: invalid username/password; logon denied

[Major] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:46:38
    Mounting target database replica on the backup host failed.

[Warning] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:46:39
    The database reported error while performing requested operation.

SHUTDOWN IMMEDIATE sqlcode 1017

[Warning] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:46:39
    The database reported error while performing requested operation.

ERROR:
 ORA-01017: invalid username/password; logon denied

[Major] From: ob2rman@HOST2 "DATABASE"  Time: 03/20/14 10:46:39
    Backup of target database failed.

[Normal] From: BSM@HOST "DATABASE_DB_ZDB"  Time: 20.03.2014 10:46:40
    OB2BAR application on "HOST2" disconnected.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:40
    Resuming the backup system.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:40
    Disabling the backup system:
    1) Dismounting filesystems,
    2) Deactivating volume groups.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:40
    Filesystem /dev/vgPACKAGE_r2/redo2DATABASE
    has been successfully dismounted
    from /PACKAGE/redo2/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:40
    Filesystem /dev/vgPACKAGE_r1/redo1DATABASE
    has been successfully dismounted
    from /PACKAGE/redo1/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:40
    Filesystem /dev/vgPACKAGE_db01/DATABASEfs2
    has been successfully dismounted
    from /PACKAGE/oracfg2/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:40
    Filesystem /dev/vgPACKAGE_r1/DATABASEfs1
    has been successfully dismounted
    from /PACKAGE/oracfg1/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:40
    Filesystem /dev/vgPACKAGE_db01/db1DATABASE
    has been successfully dismounted
    from /PACKAGE/db01/DATABASE.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:41
    Volume group vgPACKAGE_db01 has been successfully deactivated.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:42
    Volume group vgPACKAGE_r1 has been successfully deactivated.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:43
    Volume group vgPACKAGE_r2 has been successfully deactivated.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:43
    Disabling of the backup system completed.

[Normal] From: SSEA@HOST "SSEA"  Time: 20.03.2014 10:46:43
    ABORTED SSEA-Application Agent on HOST.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:43
    The backup system was successfully resumed.

[Normal] From: SSEA@HOST2 "SSEA"  Time: 20.03.2014 10:46:43
    ABORTED SSEA-Backup Agent on HOST2.

[Critical] From: BSM@HOST "DATABASE_DB_ZDB"  Time: 20.03.2014 10:46:43
    None of the Disk Agents completed successfully.
    Session has failed.

[Normal] From: BSM@HOST "DATABASE_DB_ZDB"  Time: 20.03.2014 10:46:43

    Backup Statistics:
          
        Session Queuing Time (hours)         0,02        
        -------------------------------------------      
        Completed Disk Agents ........          0          
        Failed Disk Agents ...........          0          
        Aborted Disk Agents ..........          0          
        -------------------------------------------      
        Disk Agents Total  ...........          0          
        ===========================================      
        Completed Media Agents .......          0          
        Failed Media Agents ..........          0          
        Aborted Media Agents .........          0          
        -------------------------------------------      
        Media Agents Total  ..........          0          
        ===========================================      
        Mbytes Total .................       0 MB        
        Used Media Total .............          0          
        Disk Agent Errors Total ......          0    


============================================================================
                      Session failed!
============================================================================

I Hope you can help me

BR
Puschl

Hi,

I'm planning a much-needed upgrade of my DP environment, going from 6.20 on a W2K3 32-bit cluster to 7.0 on a W2K8 R2 64-bit cluster.

I had originally considered going straight to 8.1 but it became clear that that wouldn't be possible as W2K3 isn't supported.

So my plan was to upgrade to 7.0 on my current system, then transfer and convert the IDB for 64-bit on the new platform in line with the steps in the Installation Guide. However, a check of the Support Matrix suggests that DP7.0 doesn't support 32-bit W2K3.

Can anyone suggest how best to approach this problem?

Is it possible to integrate IDB files from a 6.20 IDB into a 7.0 (or 8.1) installation?

Any advice would be welcome...

Thanks,

Bob

Hi Folks ,

When initaiting IDB autorecovery getting error " Options syntax error. Unexpected option -dev at position 9. "

Pls suggest.

[root@testapp bin]# ./omniofflr -idb -autorecover
[Normal] From: OMNIOFFLR@testapp.bakhashab.com "Offline Restore" Time: 03/20/2014 08:54:22 PM
Opening obrindex.dat:
/var/opt/omni/server/db80/logfiles/rlog/obrindex.dat -> SUCCEEDED

[Normal] From: OMNIOFFLR@testapp.bakhashab.com "Offline Restore" Time: 03/20/2014 08:54:22 PM
Scanning obrindex.dat: preparing for restore...

Session 2014/02/13-1 selected for restore, backup mode "FULL".
DaID: 1392303619
DaID: 1392303618
DaID: 1392303617
DaID: 1392303620
DaID: 1392303613
DaID: 1392303614
DaID: 1392303616
DaID: 1392303615
DaID: 1392303610
DaID: 1392303609
DaID: 1392303612
DaID: 1392303611
DaID: 1392303608
DaID: 1392303606
DaID: 1392303607
DaID: 1392303602
DaID: 1392303604
DaID: 1392303603
DaID: 1392303605

[Normal] From: OMNIOFFLR@testapp.bakhashab.com "Offline Restore" Time: 03/20/2014 08:54:22 PM
Ready for restore.

[Critical] From: OMNIOFFLR@testapp.bakhashab.com "Offline Restore" Time: 03/20/2014 08:54:22 PM
Options syntax error. Unexpected option -dev at position 9.

Hello Guru's,

Good Day...

I have the following error message when i try to configure the DB backups in my DP.

The database reported error while performing requested operation.
SBT_LIBRARY=/usr/omni/lib/libob2oracle8_64bit.a
CHILDERROR:1
Process exit code: 1, Signal: 0
RMAN PID=23199776
APPERROR:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
Additional information: 256
Additional information: 13
Recovery Manager complete.

DP Version 8.0

Operating System DP Linux

Client OS IBM AIX

Please advise me on how to fix this issue... 

Hi guys

I'm in dilemma.

The particular server suddenly failing to backups.

So here's the information:

3 servers in the same segment, 2 able to backup and 1 failed:

[Critical]

[61:12500] Cannot connect to inet for getting filesystem list
on host"fqdn".

[Warning]

Cannot get the list of filesystems on host "fqdn".
Backup of this host will be retried at end of session.

[Warning]

[61:2013] Some of the backup devices are occupied. Session is waiting
for all the devices to get free.

We are using port 5555 for the communication.

All servers are able to telnet port 5555 to the cell server.

Cell server able to telnet all servers accept the one failing, on port 5555.

What I've done, verified firewall port is open from cell to failed server - OK

Verified that local firewall on failed server is turned of - OK

Verified that port 5555 is listening on failed server - OK

Verified that cell server can telnet to port RDP 3389 to the failed server - OK

Reinstalled DP agent on the failed server, for about 5 times - Services OK

Removed server from Cell server, and re-added. - Not OK

I know this sound like firewall issue but the network team has confirmed the port is open.

Anyone has experienced this and how should I move forward???

Thank you so much in advance.

PS: DP agent version is 6.10, same across all 3 servers

Hello Expert,

Need advice from you experts on my current DP setup.

I am using Dp 7.01 with cell manager on windows 2008 R2 64bit. All the clients in the enviornments are winodws only and total clients we have is around 30. During this year auditing the auditor has raised the concerned for backup data encryption. Currently I am using MSL2024 with ultrium 3 drive at production site and standalone tape drive with ultrium 3 on DR site.

Now as per auditor I need to encrypt my backup data. I belive I have 2 options here

1. Drive based encryption

2. Software based encryption

My concerned over here is what are the limitations of drive based encryption and software based encryption. I hears there are performance issue in software based encryption so I don't want to go for that. Hence my option will be drive based encryption only.

Can anyone suggest what are the limitations of drive based encryption? Also I need to upgrade the ultrium 3 to minimum of ultrium 4 to use drive based encryption. Do I need to upgrade this drive to both site production and DR as I am restoring my production backup at DR regularly for testing.

Also if I take increment backup can I be able to restore it at DR since at DR I have standalone tape drive?

Please excuse me if I am not very clear.

Many thanksfor any help in advance.

Regards,

Hi Folks,

I am trying to deploy the web plugin for VMware/GRE on a vCenter server running under Linux (SLES).

I downloaded the OVF template for Linux from VMware and my client wants to use that.

I read and studied carefully the integration guide, but somehow, the war files for the tomcat instance are just not getting installed on the vCenter server.

Any ideas or limitations?

I checked out another client of mine and their cell manager is running on Windows and from there I can select the web-plugin for deployment.

I have never read in the support matrix that vCenter under Linux is not supported.

Thanks