I was checking on my Device configuration and I realized that the robotic paths are missing. I have a Cell Manager with a SAN D2D device connected. Inside, I got 2 virtual tape libraries. The library 1 has 250 virtual slots and the library 2, 150 virtual slots. I have a 20 TB license for VTL. I also noticed that my cell manager (windows 2008 R2) cannot see my exchanger anymore. I have this output: C:\Program Files\OmniBack\bin>devbra.exe -dev Tape HP:Ultrium 4-SCSI Path: "scsi3:0:11:0C" SN: "MXQ2400BHT" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:10:0C" SN: "MXQ2400BHR" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:9:0C" SN: "MXQ2400BHP" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:8:0C" SN: "MXQ2400BH9" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:7:0C" SN: "MXQ2400BHY" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:6:0C" SN: "MXQ2400BHW" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:5:0C" SN: "MXQ2400BHH" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:4:0C" SN: "MXQ2400BHF" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:3:0C" SN: "MXQ2400BHC" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:2:0C" SN: "MXQ2400BH7" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:1:0C" SN: "MXQ2400BHM" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 Tape HP:Ultrium 4-SCSI Path: "scsi3:0:0:0C" SN: "MXQ2400BHK" Description: HP LTO4 Drive Revision: ED41 Device type: lto [13] Flags: 0x0001 No changes were made on SAN Zoning. Any ideas?
↧
