We have DP 7.03 in our setup with win 2008 R2 cell manager and hpux 11iv3 clients .
For evry backup we have to wait for 10 min to start it .
Please find below sessin log ;
[Normal] From: BSM@dpb "ARCH_BKP_154_FRI" Time: 3/27/2015 12:25:05 PM
Opening MultiPath library control named 'HP:MSL G3 Series' on path 'hnu;/dev/rac/c34t0d1'.
[Warning] From: UMA@dcdb2 "HP:MSL G3 Series" Time: 3/27/2015 12:35:03 PM
The device "HP:MSL G3 Series" could not be opened("Device could not be accessed")
[Normal] From: UMA@dcdb2 "HP:MSL G3 Series" Time: 3/27/2015 12:35:03 PM
Starting the device path discovery process.
[Normal] From: UMA@dcdb2 "HP:MSL G3 Series" Time: 3/27/2015 12:35:08 PM
A new path(s) "/dev/rchgr/autoch1" found for device "HP:MSL G3 Series" and stored.
[Normal] From: UMA@dcdb2 "HP:MSL G3 Series" Time: 3/27/2015 12:35:08 PM
Device path discovery process finished.
[Normal] From: BMA@dcdb2 "HP:Ultrium 4-SCSI_1" Time: 3/27/2015 12:35:08 PM
By: UMA@dcdb2@/dev/rchgr/autoch1
Loading medium from slot 56 to device /dev/rtape/tape3_BESTn
What could be the reson for the same ?
Its very anoying and very irritating .
