Hi Team,
DP Version 6.11
We take the NDMP backups of 2 Netapp filers to which 2 tape drives are connected through FC,
no Mulipath Device is congiured as Tape Drives are connected straightly to Netapp Filers.
Till now the backups are running with the Tape Library 1, As only 1 tape library and 2 Drives are not sufficient to run all the backups.
We have added another Tape Library with 2 Drives, now the backups are not running with the Newly added Library.
Below is the error –
[Major] From: BMA-NDMP@xyzmmhp001 "ZWL - NDMP Tape Device 4" Time: 4/14/2017 10:54:59 AM
[90:54] rst2a
Cannot open device (Target drive is busy.)
But the there is no Tape in the Drive
And below is the configuration –
SCSI address of Tape library 1 mc0 and SCSI address of Tape library 2 is mc1
gob2sb11f01*> sysconfig -t
Tape drive (4a.125) Hewlett-Packard LTO-4
rst0l - rewind device, format is: LTO-2(ro)/3 2/400GB
nrst0l - no rewind device, format is: LTO-2(ro)/3 2/400GB
urst0l - unload/reload device, format is: LTO-2(ro)/3 2/400GB
rst0m - rewind device, format is: LTO-2(ro)/3 4/800GB cmp
nrst0m - no rewind device, format is: LTO-2(ro)/3 4/800GB cmp
urst0m - unload/reload device, format is: LTO-2(ro)/3 4/800GB cmp
rst0h - rewind device, format is: LTO-4 800GB
nrst0h - no rewind device, format is: LTO-4 800GB
urst0h - unload/reload device, format is: LTO-4 800GB
rst0a - rewind device, format is: LTO-4 1600GB cmp
nrst0a - no rewind device, format is: LTO-4 1600GB cmp
urst0a - unload/reload device, format is: LTO-4 1600GB cmp
Tape drive (4b.125) Hewlett-Packard LTO-4
rst1l - rewind device, format is: LTO-2(ro)/3 2/400GB
nrst1l - no rewind device, format is: LTO-2(ro)/3 2/400GB
urst1l - unload/reload device, format is: LTO-2(ro)/3 2/400GB
rst1m - rewind device, format is: LTO-2(ro)/3 4/800GB cmp
nrst1m - no rewind device, format is: LTO-2(ro)/3 4/800GB cmp
urst1m - unload/reload device, format is: LTO-2(ro)/3 4/800GB cmp
rst1h - rewind device, format is: LTO-4 800GB
nrst1h - no rewind device, format is: LTO-4 800GB
urst1h - unload/reload device, format is: LTO-4 800GB
rst1a - rewind device, format is: LTO-4 1600GB cmp
nrst1a - no rewind device, format is: LTO-4 1600GB cmp
urst1a - unload/reload device, format is: LTO-4 1600GB cmp
gob2sb11f02> sysconfig -t
Tape drive (4a.125) Hewlett-Packard LTO-4
rst0l - rewind device, format is: LTO-2(ro)/3 2/400GB
nrst0l - no rewind device, format is: LTO-2(ro)/3 2/400GB
urst0l - unload/reload device, format is: LTO-2(ro)/3 2/400GB
rst0m - rewind device, format is: LTO-2(ro)/3 4/800GB cmp
nrst0m - no rewind device, format is: LTO-2(ro)/3 4/800GB cmp
urst0m - unload/reload device, format is: LTO-2(ro)/3 4/800GB cmp
rst0h - rewind device, format is: LTO-4 800GB
nrst0h - no rewind device, format is: LTO-4 800GB
urst0h - unload/reload device, format is: LTO-4 800GB
rst0a - rewind device, format is: LTO-4 1600GB cmp
nrst0a - no rewind device, format is: LTO-4 1600GB cmp
urst0a - unload/reload device, format is: LTO-4 1600GB cmp
Tape drive (4b.125) Hewlett-Packard LTO-4
rst2l - rewind device, format is: LTO-2(ro)/3 2/400GB
nrst2l - no rewind device, format is: LTO-2(ro)/3 2/400GB
urst2l - unload/reload device, format is: LTO-2(ro)/3 2/400GB
rst2m - rewind device, format is: LTO-2(ro)/3 4/800GB cmp
nrst2m - no rewind device, format is: LTO-2(ro)/3 4/800GB cmp
urst2m - unload/reload device, format is: LTO-2(ro)/3 4/800GB cmp
rst2h - rewind device, format is: LTO-4 800GB
nrst2h - no rewind device, format is: LTO-4 800GB
urst2h - unload/reload device, format is: LTO-4 800GB
rst2a - rewind device, format is: LTO-4 1600GB cmp
nrst2a - no rewind device, format is: LTO-4 1600GB cmp
urst2a - unload/reload device, format is: LTO-4 1600GB cmp