Hello!
I did a lot of tests to migrate a Windows Cell Manager IDB to a different Server, as described in the Installation Guide DP 9.08 Page 285 ff.
OLD_SERVER was a Windows Server 2008 x64 with DP 9.08 , the NEW_SERVER is a Windows Server 2012 R2, both german OS version.
The NEW_SERVER name is different from the old one, the IP address is the same.
The last successful FULL backup of the IDB is stored on a LTO3 tape.
On the NEW_SERVER I created an LTO3 backup device identical to the old one and successfully imported the media.
After importing the IDB ( page 289 ) there are lots of problems:
- I must definitely replace all keystorePassword and truststorePassword und generate a new certificate ( page 291 ) to connect to the CM
- Clients are missing
- only filesystemsbackup specifications are listed, Exchange 2010 is missing , schedules are missing
- only NEW_SERVER is listed as a client, but LTO3 device ist owned by the OLD_SERVER
It is to mention that the documentation is written very careless ( like /etc/opt/ ... for a Windows Server ) and one point is missing:
the clean-up after an successfully migration , because the db80_restore\idb path keeps the active path !!
Any ideas how to solve my trouble?
Best regards, Dirk