I am running DP9.07. Just before upgrading from 9.06 to 9.07 our Data Protector is reporting a wierd error. I can get it to happen even just by trying to format a tape. What is wierd is that it happens... the tape does get formatted... then the message happens again.... and again... Ideas how to debug? Our CM is HP-UX 11.31. The tape library is an MSL6060
Sample session:
[Normal] From: MSM@sapbck.ssmhc.com "LTO_Drive_2" Time: 9/20/2016 1:43:02 PM
Media session 2016/09/20-109 started.
[Normal] From: MMA@sapbck.ssmhc.com "LTO_Drive_2" Time: 9/20/2016 1:43:02 PM
STARTING Media Agent "LTO_Drive_2"
[Normal] From: MMA@sapbck.ssmhc.com "LTO_Drive_2" Time: 9/20/2016 1:43:02 PM
=> UMA@sapbck.ssmhc.com@/dev/rchgr/autoch3
Loading medium from slot 3 to device /dev/rtape/tape36_BESTn
[Warning] From: MMA@sapbck.ssmhc.com "LTO_Drive_2" Time: 9/20/2016 1:51:07 PM
The device "LTO_Drive_2" could not be opened("Device could not be accessed")
[Normal] From: MMA@sapbck.ssmhc.com "LTO_Drive_2" Time: 9/20/2016 1:51:07 PM
Starting the device path discovery process.
[Normal] From: MMA@sapbck.ssmhc.com "LTO_Drive_2" Time: 9/20/2016 1:51:12 PM
A new path(s) "/dev/rtape/tape36_BESTn" found for device "LTO_Drive_2" and stored.
[Normal] From: MMA@sapbck.ssmhc.com "LTO_Drive_2" Time: 9/20/2016 1:51:12 PM
Device path discovery process finished.
[Normal] From: MMA@sapbck.ssmhc.com "LTO_Drive_2" Time: 9/20/2016 1:58:16 PM
=> UMA@sapbck.ssmhc.com@/dev/rchgr/autoch3
Unloading medium to slot 3 from device /dev/rtape/tape36_BESTn
[Normal] From: MMA@sapbck.ssmhc.com "LTO_Drive_2" Time: 9/20/2016 1:58:28 PM
COMPLETED Media Agent "LTO_Drive_2"