Hi all!
I have a problem with MA on Solaris 10 and 11.
Tested with Data Protector version 7.0.3, 8.0 and 9.0, the results are the same:
12/ 1/14 05:26:10 PM SecLibIpc.1115.0 ["/lib/ipc/ipc.c $Rev: 39452 $ $Date:: 2013-10-10 20:51:21":1742] A.07.00 b105
ipc initialized before cmn!
SCTL_io: ioctl() failed
12/ 1/14 05:26:10 PM DEVBRA.1115.0 ["/ma/spt/sctl.c $Rev: 39452 $ $Date:: 2013-10-10 20:51:21":2691] A.07.00 b105
SCTL_io: ioctl(fd=4, SCTL_IOCTL, cmd) failed. cdb_length=12, {errno=5} dump:
SCTL_io: ioctl() failed
12/ 1/14 05:26:10 PM DEVBRA.1115.0 ["/ma/spt/sctl.c $Rev: 39452 $ $Date:: 2013-10-10 20:51:21":2691] A.07.00 b105
SCTL_io: ioctl(fd=4, SCTL_IOCTL, cmd) failed. cdb_length=12, {errno=5} dump:
SCTL_io: ioctl() failed
12/01/14 17:56:31 BMA.1215.0 ["/ma/spt/sctl.c $Rev: 39452 $ $Date:: 2013-10-10 20:51:21":2691] A.07.00 b105
SCTL_io: ioctl(fd=6, SCTL_IOCTL, cmd) failed. cdb_length=16, {errno=5} dump:
Connection to MSL6030 with two LTO3 and HP StorageWorks e1200-320 4G Interface Controller is trough FC .
Tape is loaded into the drive, but after that tape is in Idle state, message above is recorded in debug.log and on the NSR is the following:
CHK COND with Sense Key=0x4, ASC=0x8, ASCQ=0x0 from SCSI LUN 0/1/0 Rte x4
Please help!
Nedeljko